Hydraulic energy is favored by many of us as a cheap and environmentally friendly energy source. As these devices operate with hydraulic fluid stored under a great level of pressure, the equipment are designed with elements to aid the storage and transmission of the hydraulic fluid. Nonetheless the parts and designs of the hydraulic systems vary primarily based on their design and style.

The basic hydraulic systems are designed with a pump, a hydraulic control valve, and other Control Valves . Further, you can find the design and usefulness of the valves varying based on the design and usage of the gear. Some of the smaller equipment and appliances use stop and check valves to control and regulate the flow of hydraulic oil, whereas the big machines use pressure reducing valves.

Often the hydraulic valves are also referred to as spool valves due to their parts moving like spool of thread. These valves are also designed particularly to control both supply and return lines of the system. So the apparatus can be operated in multiple directions just by reversing the low and high pressure connections. The spools are connected with a solenoid or levers to operate and run the machine.

When the system operator wants to raise the truck, he should move the operating lever that will end in moving the spools to the right. This action will further lead straight to connecting the high pressure to the cylinder bottom and lifting the wagon dump. So the top of the cylinder will connect with the return line by facilitating the flowing out of hydraulic liquid.

Once the load is entirely dumped, the operator has to move the spool in reverse direction. The action will result in connecting the high pressure hydraulic liquid to the cylinder top. The operator can easily push it down to return the oil to the bottom of the cylinder.

Todd Smith and Power Systems has offered items like a hydraulic power unit or hydraulic solenoid to its consumers since 1983.

More related products of valves, pls enter into www.rmpv.com

2012-04-05

Back